Advance Scaffolding | Scaffolding System | Cuplock

Cuplock, Scaffolding System

Adaptor

The Drophead Adaptor units provide for the easy conversion of Dropheads from the Waffle and Trough or Metriform Support Systems for use with Cuplock.

Socket Base

The Socket Base is used in conjunction with the Universal jack and is drilled to allow for the insertion of a securing bolt if required. The dimensions are as mentioned.

Universal Jack

The Screw Jack provides a method of jacking which can be used at either the top or bottom of a scaffold structure. It is used in conjunction with Forkheads, Socket Base and Drophead Adaptors.

Spigot

Made out of 300 mm long square tube and with out and bolt spigots are used for connecting verticals.

Spigot Pin

A quick action locking device with no loose nuts and bolts which resists minor tensile forces between vertical members.

Longitudinal Bracing

For diagonal bracing of scaffolding a range of longitudinal braces made out of 20 mm N. B. 'L' tubes with swivel forged blades at either ends to be fitted into cups of Cuplock standards are available.

Cuplock Cuplock Standard (Vertical) | Cuplock Ledger (Horizontal) | Cuplock Omega Transoms | Cuplock Omega Hop-Up Brackets | Galvanized Steel Batterns | Cuplock Intermediate Transoms | Inside Board Transoms | Bridging Horizontals | Cantilever Frame | Beam Brackets | Fixed Forkhead | Adaptor | Socket Base | Universal Jack Spigot | Spigot Pin | Longitudinal Bracing

Scaffolding System Cuplock | Kwik Stage | Ring Systems | Frame System | Formwork System | Props & Adjustable Telescopic Props | Spans | Wallform & Hardware Scaffolding System | Scaffold Fittings | Scaffold Tubes | Accessories | International Standards