Advance Scaffolding | Scaffolding System | Kwik Stage

Kwik Stage, Scaffolding System

Kwik Stage Return Transom

Manufactured from a steel pressing shaped so that it can be placed over a Ledger to form a 90% return in the scaffold, the Return Transom has a seating on one side for Steelstage or Timber Battens. SIZE AVAILABLE 4 ft 2ins (1.2M)

Kwik Stage Diagonal Brace

Diagonal Brace has pivoting captive wedge fittings welded to each end, which locate the "V" pressing on the standards. Used to form facade bracing. SIZES AVAILABLE 12 ft 0ins (2.4M) 9 ft 0ins (2.7M)

Kwik Stage Steel Batten

They are long live pressed steel battens with steel battens as part of the Quikstage System. ITEMS 8 ft 0ins (2.4M) 6 ft 0ins (1.8M) 4 ft 2ins (1.2M)

Kwik Stage Transoms Toe Board Bracket Tie Bar

A length of 38 mm x 38 mm angle iron with a dowl at both ends. Used to connect stage brackets together. ITEMS 8 ft 0ins (2.4M) 6 ft 0ins (1.8M) 4 ft 0ins (1.2M)

Kwik Stage Access Stage Bracket

A Cantilever transom similar to the stage bracket with integral guard rail standard to take a ledger. This component is used where a platform is required on the outside of the scaffold with steel or timber battens makes a platform of 0.686 m wide and available in both rolled section and back to back angles. ITEMS 3 BOARD

Kwik Stage Kwik Stage Standards/Verticals | Kwik Stage Ledgers (Cast Ends) | Kwik Stage 2 Board And 3 Board Stage Bracket | Kwik Stage One Board Stage Bracket | Kwik Stage Ledgers (Pressed Ends) | Kwik Stage Access Stage Bracket | Kwik Stage Return Transom | Kwik Stage Diagonal Brace | Kwik Stage Steel Batten | Kwik Stage Transoms Toe Board Bracket Tie Bar

Scaffolding System Cuplock | Kwik Stage | Ring Systems | Frame System | Formwork System | Props & Adjustable Telescopic Props | Spans | Wallform & Hardware Scaffolding System | Scaffold Fittings | Scaffold Tubes | Accessories | International Standards