Advance Scaffolding
Scaffolding SystemScaffold FittingsScaffold Tubes
Advance Scaffolding Advance Scaffolding | Scaffolding System | Kwik Stage

Kwik Stage, Scaffolding System


Kwik Stage Standards/Verticals


Quikstage Standards / Verticals form the support or the uprights and are made from Standard Scaffold Tubes of 48.3 x 4 mm thick. With the latest innovations, they are also available in 48.3 X 3.25 mm in both Grade 50 & 40 C as per BS: 4360. They have a series of "V" Pressed welded at nominal 500 mm on the tube to provide a location for ledger and transoms. They are also available with integral wedge spigots or as open ended.

SIZES AVAILABLE

Open Ended Wedge Spigoted Round Spigoted
9 ft 9 ins (3M) 9 ft 9 ins (3M) 9 ft 9 ins (3M)
6 ft 6 ins (2M) 6 ft 6 ins (2M) 6ft 6 ins (2M)
4 ft 10.5 ins (1.5M) 4 ft 10.5 ins (1.5M) 4 ft 10.5 ins (1.5M)
3 ft 3 ins (1M) 3 ft 3 ins (1M) 3 ft 3ins (1M)

Kwik Stage Standards/Verticals
 


Click Here For Query


Kwik Stage Ledgers (Cast Ends)


These items are made from tube with a cast wedge-fixing device at each ends. These are used to lie in the uprights or standards longitudinally. On the inside of the scaffold of the scaffold they are used at platform level and on the outside as a guardrail.


SIZES AVAILABLE
8 ft. 0 ins. (2.4M)
6 ft. 0 ins. (1.8M)
4 ft. 2 ins. (1.2M)


Kwik Stage Ledgers (Cast Ends)



Click Here For Query


Kwik Stage 2 Board and 3 Board Stage Bracket


The Two and Three Board Stage Brackets enable an additional 450 mm (1’6") and 675mm (2’3") platform respectively to be provided on the inside of the scaffold nearest the building. Tie Bars must be used to connect the brackets together. They are available in both rolled section and back to back welded angle.


SIZES AVAILABLE
2 BOARD
3 BOARD


Kwik Stage 2 Board and 3 Board Stage Bracket


Click Here For Query


Kwik Stage One Board Stage Bracket


One Board Stage Bracket enables an additional 255 mm platform to be provided on the inside of the scaffold. They do not require Tie Bars to connect them together. Available with rolled "T" Section or back to back welded angles.


ITEM
1 BOARD

Kwik Stage One Board Stage Bracket
 


Click Here For Query


Kwik Stage Ledgers (Pressed Ends)


These items are made from tube with a pressed wedge-fixing device at each ends. These used to lie in the uprights or standards longitudinally. On the inside of the scaffold they are used at platform level and on the outside as a guardrail.



SIZES AVAILABLE
8 ft. 0 ins. (2.4M)
6 ft. 0 ins. (1.8M)
4 ft. 2 ins. (1.2M)


Kwik Stage Ledgers (Pressed Ends)



Click Here For Query



Kwik Stage

Kwik Stage Standards/Verticals | Kwik Stage Ledgers (Cast Ends) | Kwik Stage 2 Board And 3 Board Stage Bracket | Kwik Stage One Board Stage Bracket | Kwik Stage Ledgers (Pressed Ends) | Kwik Stage Access Stage Bracket | Kwik Stage Return Transom | Kwik Stage Diagonal Brace | Kwik Stage Steel Batten | Kwik Stage Transoms Toe Board Bracket Tie Bar
Scaffolding System

Cuplock | Kwik Stage | Ring Systems | Frame System | Formwork System | Props & Adjustable Telescopic Props | Spans | Wallform & Hardware

Scaffolding System | Scaffold Fittings | Scaffold Tubes | Accessories | International Standards